Senkosam
Active member
- Sustained Higher Voltage: Flooded lead-acid batteries drop in voltage as they discharge, whereas lithium-ion (LiFePO4) batteries maintain a high, steady voltage (often 13V to 14V+ longer).
- Overheating Brushed Motors: Manufacturers like Minn Kota advise limiting motor speed to 85% (or Speed 8.5) and lower on certain brushed motors (such as the Endura series). Running them at 100% capacity with the unyielding voltage of a lithium battery forces excessive current draw and builds up heat that older internal components aren't built to handle. [1, 2]
- Control Board and Resistor Strain: The extra power output can stress internal switches, wiring connections, and speed-control resistors, potentially "cooking" or burning out the motor.
- Manufacturer Stance: Companies explicitly warn that prolonged use above 85% speed with lithium batteries can void warranties or ruin specific older/brushed models. You can read more about these specs directly on the Minn Kota Lithium Battery Guidelines. [1, 2, 3]
- Angler Experiences: Some boaters report running LiFePO4 batteries on newer brushless or heavy-duty motors at 100% speed for years without issues. However, doing so on older, legacy, or entry-level brushed trolling motors carries a high risk of thermal damage.
- Brushed Trolling Motors use physical carbon brushes and a mechanical commutator to transfer electrical current to the rotor, creating a spinning magnetic field. It is a traditional, reliable, and simpler design.
- Brushless Trolling Motors replace physical brushes with an electronic controller. Permanent magnets sit on the rotor while the stator uses an electronic three-phase current to rotate the motor smoothly without friction
Last edited: