Motor advice/part identification

C
Charlie_merrifi
So I found a potential motor. Guy says it's a jc penny. I have never heard of it. And said it needs the throttle linkage in the handle replaced. Is this the correct brand and part. Can I even get the part. These are the pics he sent me.

1efb74a8
Eb32c309
B554a768
 
F
fishnquest
If its a jcpenney, they will be able to tell you if the part is still availlable. Beware of old motors. The miracle gro and the extension cords might be a bettter deal.
 
C
Charlie_merrifi
He says it runs well
 
T
Thuggin4Life
get the serial numbers and model numbers then call a shop and see if they can still get the part. looks like an old pennies motor. also you should check the compression and make sure they are the same in each cylinder. basially the way the motor is know you can't trottle the motor with the tiller handle so its junk unless you can get the part you need. hope this helps.
 
S
stream2.5
im pretty sure the pennys motors were either gale or scott either way... parts are NLA and next to impossible to find........ id avoid it...
 
Last edited:
C
Charlie_merrifi
Already have
 

Similar threads

Grant22
Replies
28
Views
5K
shiverfix
S
The Guides Forecast
Replies
0
Views
138
The Guides Forecast
The Guides Forecast
F
Replies
14
Views
1K
gfisher2003
G
G
Replies
5
Views
1K
hobster
hobster
Top Bottom