Motor advice/part identification

C
Charlie_merrifi
So I found a potential motor. Guy says it's a jc penny. I have never heard of it. And said it needs the throttle linkage in the handle replaced. Is this the correct brand and part. Can I even get the part. These are the pics he sent me.

1efb74a8.jpg
eb32c309.jpg
b554a768.jpg
 
F
fishnquest
If its a jcpenney, they will be able to tell you if the part is still availlable. Beware of old motors. The miracle gro and the extension cords might be a bettter deal.
 
C
Charlie_merrifi
He says it runs well
 
T
Thuggin4Life
get the serial numbers and model numbers then call a shop and see if they can still get the part. looks like an old pennies motor. also you should check the compression and make sure they are the same in each cylinder. basially the way the motor is know you can't trottle the motor with the tiller handle so its junk unless you can get the part you need. hope this helps.
 
S
stream2.5
im pretty sure the pennys motors were either gale or scott either way... parts are NLA and next to impossible to find........ id avoid it...
 
Last edited:
C
Charlie_merrifi
Already have
 

Similar threads

bass
Replies
0
Views
395
bass
bass
Fummus
Replies
3
Views
1K
Fummus
Fummus
bass
Replies
3
Views
862
bass
bass
bass
Replies
4
Views
2K
bass
bass
F
Replies
14
Views
2K
gfisher2003
G
Top Bottom