|
|
06-25-2007, 01:51 PM
|
#1 |
|
Super Moderator
Join Date: Dec 2006
Location: Springfield, OR.
Posts: 1,527
|
Aluminum boats
Any one have a magic cleaning solution for my aluminum boat, over the years it has lost its sparkle. Just want to brighten it up some, I don't want to buff it or anything like that, just get the oxidation OFF if possible. Any suggestions would be greatly appreciated.
Chuck
__________________
Practice C.P.R. (Catch Photograph and Release) 
|
|
|
|
06-25-2007, 01:56 PM
|
#2 |
|
Master Angler
Join Date: Dec 2006
Location: Keizer
Posts: 335
|
Chuck- If you Google "aluminum boat cleaner" there appears to be a plethora of products.
__________________
E.J. "I am going where streams of whiskey are flowing" |
|
|
|
|
06-25-2007, 05:57 PM
|
#3 | |
|
Super Moderator
Join Date: Dec 2006
Location: Springfield, OR.
Posts: 1,527
|
Quote:
Chuck
__________________
Practice C.P.R. (Catch Photograph and Release)
|
|
|
|
|
|
06-25-2007, 06:25 PM
|
#4 |
|
Sustained
Join Date: Jan 2007
Location: Yewgene
Posts: 276
|
Acids like 20% horticultural vinegar are a great way to clean the metals in my business.. Lead, Zinc, Copper, Brass. Amonia is an accelerator of oxidation so stay away from that.
__________________
What's your angle? |
|
|
|
|
06-25-2007, 06:43 PM
|
#5 |
|
Sustained
Join Date: Jan 2007
Location: Yewgene
Posts: 276
|
I do not own or have ever owned an aluminum boat but I did come by a post by a guy over at the Fishsniffer.com web site and here it is...
QUOTE You guys work to hard or expect too much from polish. There are 4 different grades of Aluminum used in the industry and the grade they use for boat hulls (formulation) is not condusive to a highly polished finish like can be seen on Airplanes. Oxidation of the Aluminum is constant. Even after an acid wash you will notice a difference by the next day. If you seriously want to "clean" the hull, go to an automotive paint supply and ask them for the Aluminum acid wash product. You do have to dilute it and use a spray bottle to apply it. Follow the directions closely. The finish will "not" look like polished Aluminum after the wash. It will look almost white. It takes off any dullness or Ocean scum or corrosion that has built up. It is also great for cleaning annodes. After the cleaning is when I would apply Sharkhide. I would plan to spray the Sharkhide on. I used a sponge brush to apply it to my boat and up close can see the brush marks. The product thins and cleans with Laquer thinner. The advantage is great with Sharkhide in that it is a tough finish and preserves the clean look of your hull. I first learned of the product from my boat manufacturer in Oregon. The product is very well known throughout Washington and Oregon and gaining in popularity in Calif. It preserves the Aluminum from the attacks of Salt and alkaline waters. It does have a tough finish and stands up to scrapes and abuse. It is expensive at something like $50. a quart, but that is plenty for two coats and there will be some left over. My boat is 22'. For more info, here is their site. http://www.sharkhide.com/" END QUOTE Here is the URL on that discussion about cleaning aluminum boats. http://www.fishsniffer.com/cgi-bin/f...num=1147757829
__________________
What's your angle? Last edited by Dichrofisher : 06-25-2007 at 06:46 PM. Reason: added info |
|
|
|
|
06-26-2007, 08:24 PM
|
#6 |
|
Angler
Join Date: Dec 2006
Location: on the river
Posts: 198
|
Troutski, I have some stuff I will bring you that works great...
__________________
Andrew |
|
|
|
|
06-26-2007, 09:46 PM
|
#7 | |
|
Super Moderator
Join Date: Dec 2006
Location: Springfield, OR.
Posts: 1,527
|
Quote:
  Chuck
__________________
Practice C.P.R. (Catch Photograph and Release)
|
|
|
|
|
| Our Sponsor |
